FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Drive shaft safety loop bolts to trans
Anyone remember those safety loops that bolt to the trans mount?
I was trying to find one for my daughters friend but a search didn’t turn anything up. He’s just starting out racing his car and I didn’t want him To have to hack up his floor pans the car is mint.
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
#2
|
||||
|
||||
Scratch that I found it.
For those looking it’s ram air restoration that had them. https://www.ramairrestoration.com/ds...owerglide.html
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
#3
|
||||
|
||||
I have the RamAir on my Formula
__________________
74 Formula Below motor destroyed last fall 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 New motor 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet Results will be posted after the track |
#4
|
||||
|
||||
Took mine off due to intense rattles at mid-track. Ovalled-it for more range, then tried rubber sandwich against floor brace.
Worked, but still removed to make the fix permanent by drilling into hoop to hold the thick rubber strips. |
#5
|
|||
|
|||
PTFB has them too. i use one on my TH400 72 firebird, had to trim it a bit to fit better, runs real close to the top of the floor.
http://pro-touringf-body.com/chassis_components.html |
#6
|
||||
|
||||
I bought several from Indian Adventures and I thought someone picked up their product line.
|
#7
|
||||
|
||||
Bought one yrs ago and very tight fit in a Sec gen F body. Darn thing has some weight to it,.
|
#8
|
|||
|
|||
Was wondering if anyone has installed one of these in a 61-64 full size car? Thinking I may need one with my 4-speed car. But very small trans tunnel and lots of stuff on the way. Exhaust runs extremely close to the driveshaft.
|
#9
|
||||
|
||||
Do not need much driveshaft clearance from side to side.
If you make the hoop from .125 thick material in the tunnel area it will still contain the driveshaft. Make the "band" wider so that you have more strength that way vs a thicker narrow width retention band. You want to retain the driveshaft if you have a u-joint bearing failure on either end. If you have a proper wall thickness driveshaft made, it does not have to be the same diameter as the factory unit. The driveshaft should not fail in the center of the tube. Retention of the driveshaft at the 3rd member of the rear axle is a bit more complicated. The driveshaft will have some angle change as the rear goes thru its travel. The retention material can be thicker there. And high quality "U-Joints" installed in the new tube. It gets real ugly on a street car if you have a failure of the driveshaft or u-joints and it beats the crap out of your factory floorboard. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#10
|
||||
|
||||
Saw this on eBay, says F car but don’t think there’d be any difference. Seems heavier but not too crazy about how they welded it.
https://www.ebay.com/itm/27153759462...3ABFBM1O7O8YVh
__________________
" Darksiders Rule "
|
#11
|
||||
|
||||
I have one from Ames. I don't know who makes them. It actually hit the driveshaft on the top ever so slightly. I had to put in the brake to make about a 5/8" offset.
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
#12
|
||||
|
||||
I had to bend at the tab a little bit
To adjust perfect we had the car on the ground on wood so we could adjust , took a few try’s.
__________________
74 Formula Below motor destroyed last fall 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 New motor 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet Results will be posted after the track |
#13
|
||||
|
||||
I bought on I think form IA years ago-it is round and with the engine trans offset in the second gens I was not sure it would work unless bent to an oval shape
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#14
|
|||
|
|||
Has anyone had a front u-joint failure with one of these in place? I have and it didn’t work out very well.
|
#15
|
||||
|
||||
What happened? Any pics?
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#16
|
|||
|
|||
I’ll provide an update this weekend, just looking for other’s experience first.
|
#17
|
||||
|
||||
Quote:
All three had to replace their floorboards. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#18
|
||||
|
||||
Wouldn't these mess up your driveline angle ? has anybody checked before and after?
|
#19
|
||||
|
||||
I did and it did not change. I was worried about that at first. My car is a stick, 3 degrees out and 3 degrees with the loop in.
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
Reply |
|
|