[bulletpruf]

Here's the Tomahawk windage tray that I got from BOP:





Nice stuff.

Scott

[Probird]

Originally Posted by LeighP

I used the windage tray that came with my 70 455....but I inspected it, welded up the small cracks that were starting here and there, radiused a lot of sharp stress raising corners and welded in some re-inforcements where I thought it was prone to vibration. Drilled some extra drain back holes.

The last one I used I welded about 4 times. Every time I had the pan off there were more and more cracks. The welds looked like a spider web. They ran all over the thing. I finally threw it in the trash after a piece got caught up in the crank. Never used one again.