[HWYSTR455]

I'm still looking, but pretty sure it's the HL-104. Pretty much just make sure it's a 5006 conversion enclosure for H4 bulbs. The H1 bulbs, low beams/one element, sometimes come with only one terminal, try to be careful of that. Since you already have the relays you should be good there, just make sure you have like 12g wire for the grounds to the bulbs. I did 12g for all the bulb to relay connections just to be sure, and that I was running both elements at the same time on all 4. Used an ATO fuse & holder for the relay power feed too. (can see it on top of the relays in the pic)

I will keep looking, have like a 2+ foot high stack of reciepts, so may take a few mins!

.