[Tim john]

I have a set of four HURST "ALUMINUM" trim rings for sale. They have 55+ years of patina, no major dents, (surprisingly very dent free for their age and being aluminum), no twists, these do take to spring retention springs on the backside to secure them in place. A few are missing here and there but each trim rings has at least three to secure. The aluminum can easily be trimmed to remake the spring hook on the backside if so desired. Install as is for that original unrestored look or wet sand to a desired finish and polish or better yet, anodize. I always wanted to anodize these to Tiger Gold but never did. $ 1,250.00/set + shipping and insurance. These will ship from Michigan, 48757 zip code.

[Tim john]

Missing spring clip, as you can reference the above photos of what it should look like, you can see here the spring hook loop is missing. The aluminum can easily be cut and a new spring hook be cut in if desired. This is on the backside and unable to be seen when installed.

Tim

[Stuart]

Please include your location, per board rules.

[Tim john]

State and zip code is listed in revised ad. Thank You. (Item will ship from Michigan, 48757).

Tim