FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
WTB '70 FB complete jack assembly or mast only for NORWOOD production vehicle
Hi guys: I am looking for a complete jack assembly (or mast only) for a 1970 FB NORWOOD production vehicle. Please let me know what you have . Thank you!
|
#2
|
||||
|
||||
there have been a couple discussions on this subject;
It reads as thought there wasn't a given jack type for a model year and plant, moreover there were types observed with cars, and the jack supplied was somewhat generic. It also reads as though jacks would often (but not always) have a single digit year code stamped on one of the rivets. I have (because I went down this rabbit trail, two jack mast assemblies that are identical in every way, but one has a dated rivet, and the other doesn't.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
#3
|
||||
|
||||
70 FB Norwood jack mast
Hi unruhjonny ... Yes I have been looking at many posts for the plant to plant variations for these jacks but the jack mast is missing from this vehicle and not too woried about it being dated coded. Photo attached of the jack mast I am looking for. Thank you! Doug
|
#4
|
||||
|
||||
I’ve got two jacks similar to what you are looking for. The difference is in the mast cross section. The second photo shows the difference.
I can’t put my hands on either base at the moment, but probably have them in one of many parts boxes! |
Reply |
|
|