FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
No personal best
Out playing around last night…kind of muggy with DA about 2k and water grains at 116-117…..seen worse in FL
Sad that I was 1 of maybe 3 old muscle cars in a sea of new gen muscle. Getting rare these day’s. Anyway’s, had fun and the ‘old goat’ ran decent…..spinning a tad on launch Don’t bag me for the light as I was expecting a sportsman tree and got a pro tree by surprise!
__________________
71 GTO, 463, KRE 295 cfm heads ported by SD Performance, RPM intake, Qjet, Dougs Headers, Comp cams HR 246/252 ...11 to 1 , 3.55 cogs, 3985lbs.....day three- 11.04 at 120mph ....1.53 60', 6.98 1/8 mile |
The Following User Says Thank You to mchell For This Useful Post: | ||
#2
|
|||
|
|||
That goat looks badass launching like that!
|
#3
|
||||
|
||||
Awesome picture!
__________________
Sean 1967 GTO Koerner built 468 with Edelbrock RP’s 315cfm by Butler, Luanti Voodoo HR 20510713, 4l80e, Holley Terminator EFI |
#4
|
||||
|
||||
Beautiful car that runs fantastic. That's a car everyone wants.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#5
|
|||
|
|||
Sounds like a good night..good time for the DA and not totally hooking! The old muscle cars do stand out these days but look so good on the dragstrip!
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2 373 gears 3200 Continental Convertor best et 10.679/127.5/1.533 60ft 308 gears best et 10.76/125.64/1.5471 |
Reply |
|
|