FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Intake and exhaust manifolds value
I recently picked up a set of 66' Sprint intake and exhaust manifolds and was wanting some opinions on the value of the parts. Also got a couple of 6-cylinder bell housings and the original 66" Quadra jet too but it's pretty crusty
__________________
62' Lemans, Nostalgia Super Stock, 541 CI, IA2 block, billet 4.5" crank, Ross, Wide port Edelbrocks, Gustram intake, 2 4150 style BLP carbs, 2.10 Turbo 400, 9" w/4:30 gears, 8.76 @153, 3100lbs Last edited by Gary H; 08-23-2022 at 07:43 PM. |
#2
|
|||
|
|||
Please post pictures.
|
#3
|
||||
|
||||
JM2C
Generally, parts value depends on the condition.
Core 4MV Carbs have very little value. I've sold very good rebuildable units for $300 (+-) Bell housings are running from $75-$150. There were no less than 3 for sale at NORWALK. The Unicorn piece is the Bellhousing Dust Shield. I can get over $150 for those when I find them. 1966 4bbl Manifolds are one year only and would clearly have more value to someone working on a '66. However, there are many who just want to have them to replace their 1BBL setup and are not concerned with years/numbers. Current prices are all over the map from $1200 to under $400 but I have never seen someone get $1200 for rusty manifolds. I sell mine Cleaned, Inspected, and Painted. Bare NO HARDWARE or LINKAGE. When I have any to sell I normally will offer for $500 shipped. But I have not had anything related in about a year and things are getting harder to locate. JM2C Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
Reply |
Thread Tools | |
Display Modes | |
|
|