FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
I could use some help.....I need three head bolts to replace damaged ones.
I'm installing the heads on my built 64 Lemans 326 engine, but I need three (3) 3-5/8" long head bolts with the "O" stamped on the top. Anyone have three good ones that I can purchase?
Last edited by melemans; 09-29-2020 at 04:43 PM. Reason: Update subject |
#2
|
||||
|
||||
I should have give me a couple hours until I get home I'll CK 410-320-7018 phil
Sent from my moto z3 using Tapatalk |
The Following User Says Thank You to rare4k For This Useful Post: | ||
#3
|
||||
|
||||
Hi
for consideration
1 sweet one 2 fair ones no pitting on shanks ,,,surface haze rust 2 heads have some heat marks Scott 2o6 465 9165 the AC tape means nothing to the bolts .. |
#4
|
||||
|
||||
Thank you, Scott, for looking. I received what I needed from crisp this morning and I'm back on my project. Thank you again!
|
#5
|
||||
|
||||
Bolts
Thank you, chrisp, for helping me out on the bolts. I received them in the mail this morning. Now I'm back on my project! Thanks to everyone that responded.
|
#6
|
|||
|
|||
No problem & always here .
|
Reply |
|
|