| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-25-2020, 11:23 AM
|
||||
|
||||
MSD Trigger wheel pilot hole diameter?
Anyone know the diameter of the pilot hole in the middle of the #8650 7" trigger wheel? Curious if it will over my old Fluidamper register that sits @ 2.46". Looks like it should. I know it uses bolts to secure, just curious if it will need to be machined to rest flat.
__________________
. Mark S . Who needs nice and pretty, when you can have mean and nasty? KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs . So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well. >>My 73 Build thread |
|
#2
09-25-2020, 03:30 PM
|
||||
|
||||
|
Called MSD/Holley Support - it wont fit. I'm far from surprised. Diameter is 1.82" according to Tech Support. Id have to machine off an awful lot for it to fit and center on the register.
__________________
. Mark S . Who needs nice and pretty, when you can have mean and nasty? KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs . So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well. >>My 73 Build thread |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
