[bruce driggers]

Selling a 522 cu. in IIa2 block , crower billet crank , (5 passes), grp rods , new 55mm Lsm cam , new bronze bushings in block ,cam bushings , crower lifters (904), cv1 heads flow 434@.900 , convertible exh. flows 297@ .900 , 2 intakes , Jeff Johnston oil pan , custom valve covers, motor plate , water pump, Ati balancer , 1 of butlers flywheels , pistons w / small ring pak , gas ported, headers for tube chassis car , will need pushrods , 1 exhaust valve , 1 spring , has new pac springs, 15,500.00 , call Bruce (843) 761-8705 or 843-408-6303 for further details

[bruce driggers]

BUMP , I also have a set of std port e- heads , new victor intake wo/ water crossover, a few roller cams , rocker sets , stud girdle , lifters I'll throw in with the eng. , also the c-v 1s has shaft rockers

[jercracing]

HI would you sell engine without heads mike

[blubiu65]

I may be interested in the edelbrock heads that you have if you don't sell them with the motor

[bruce driggers]

Originally Posted by blubiu65

I may be interested in the edelbrock heads that you have if you don't sell them with the motor

I'll let you know , Thanks Bruce

[bruce driggers]

OVER ON THE PONTIAC ZONE , THEY SEEM TO THINK I'M SELLING THIS ENGINE BECAUSE OF THE HEADS , LET ME MAKE THIS CLEAR, I'M SELLING DUE TO MY HAVING HEALTH ISSUES , WHICH CAUSED FINACIAL PROBLEMS , THAT IS THE ONLY REASON, IF ANYONE HAS ANY QUESTIONS AT ALL ABOUT IT , CALL ME . THANKS BRUCE

[bruce driggers]

I hate to do this because I feel this engine is worth the price I'm asking , but I'm going to LOWER THE PRICE TO 14,500.00 Thanks Bruce

[mysticmissle]

This ever change hands?

[bruce driggers]

Originally Posted by mysticmissle

This ever change hands?

Why , you want to buy ?

[mysticmissle]

i guess thats a no. If short block is availble I may be interested

[bruce driggers]

Not interested in parting out at this time ,it may come to that later, thanks for asking .