 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
10-18-2014, 10:20 PM
|
||||
|
||||
Rods, Pistons and 2 high end cranks
1 set 4.350 bore pistons(4.344 skirt)
1.600 CH .043, 1/16. 3/16 notches for E heads CP gas ported, 1 skirt is a little scuffed. will clean up. $100 will work with crank and 6.55 rods below and 4.125 Kellog crank 1 set 4.375 ross gas ported 1.600 CH .043 .043 3MM ring pack Eheads Perfect condition. You could re run the rings. $250 1 set grp 6.55 rods. less than 80 runs .990 pin 2.100 big end for the Kellog below they are the "Pro" rod( or whatever they call it) $200 Old early set of rubber rods. 9pcs -free for pick up. Kellog twist forged 4.125 crank. 3" main 2.100 rod Refect condition and a really nice piece. WAY BETTER THAN THE CHINA CRAP $1000 Crower Ultra light crank BILLET 4.600 stroke 3"main 2" rod Great piece and light....56lbs. 1 damaged journal will likely need welded to repair. Excellent choice for a guy wanting a less than 8000 rpm and less than 1000 hp combo. The reason it is for sale and not being repaired is although the cut aways and lightening are trick, it is not stable enough at 88-9000 rpm and 1100+hp and begins to flex. under 8000 rpm the bearings looked great. I do not want to mislead anyone and that is why it is for sale in a not repaired condition. $300 will get this back in good shape. $1000
__________________
EHTTFMF!  Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
|
#5
02-20-2015, 08:33 PM
|
||||
|
||||
|
all has been sold.....I prolly should have posted that
__________________
EHTTFMF! Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
