FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
THE LOBBY A gathering place. Introductions, sports, showin' off your ride, birthday-anniversary-milestone, achievements, family oriented humor. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
One man hood hoist
I was looking for a engine sling and ran across this devise on Amazon.
Bought it cheap enough...$83.00..I have a homemade one but not that great. Always have to round up two strong guys to remove hood off my 60. It's large and HEAVY. Thought I'd give a try. Attaches to the cherry picker.. Will be pulling motor soon... Just thought I'd pass it along..
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#2
|
||||
|
||||
I like it. There's been a few time I could have used one of those. Never knew anyone made them. Thanks for the photo.
__________________
Gary Get in, ShuT Up, Hang On! Member of the Baltimore Built Brotherhood MY GTO built 4th Week of March 1966 "Crusin' Is Not A Crime" Keep yer stick on the ice. |
#3
|
||||
|
||||
Never though of it but that would be easy to duplicate. It's a great idea. After a back operation in 2005 I built a block and tackle system off of the shop rafters to pull the hood off of my Firebird. Worked great--until I tried to use it to put it back on. It was fine until I rested the rear on the hinges and the hood slide and the very edge of the hood just tapped the windshield---CRACCCCCKKKKKK--. The one you just showed Troy would have saved a LOT of swearing!!! LOL!
Mark
__________________
My Gasser '63 Catalina build. Oh sorry, it's a Street freak. Either way it's a fun build. |
#4
|
||||
|
||||
What a great idea! I used to do it alone all the time. Never hurt myself but I know it could easily happen and I won't do it any more.
__________________
Greg Reid Palmetto, Georgia |
#5
|
||||
|
||||
Box art features an early second gen Formula.
|
#6
|
||||
|
||||
Guess I never knew how lucky I was to have a shaker hood - nice handle in the middle for one man hood pull.
__________________
Jon B |
#7
|
||||
|
||||
Quote:
I noticed the art work on box ..
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#8
|
||||
|
||||
Who sales them or where can I find one?
|
#9
|
||||
|
||||
In the past I could remove and install the steel hood on my Firebird alone, without help. I doubt I would even try it alone anymore. Now it has a fiberglass hood, which is easy to lift alone.
I wish I could remove/install the canopy on my truck alone. I wonder if such a device exists for a truck canopy?
__________________
1969 Firebird, Tx3-455/468 machined by CVMS E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid 850DP on E-85 by Eric Niefert/T2 1" plastic spacer T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400 1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine) https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be 1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine) |
#10
|
|||
|
|||
Troy thanks for sharing. I may need to get one as I need to pull the hood off of the pick-up. Not as young as I used to be and my knee won't let me handle heavy stuff like that anymore.
__________________
1971 GTO,72 400, stock bottom end, 670 heads, Lunati BMII cam, headers, iron intake Q-jet, four speed. Best 60 ft 1.806in 2004. Best 1/8th mile e.t. 8.46 with 3.55 open rear 85 Grand Prix, 70 400, casting 62 heads stock rebuild, Turbo 350 trans 78 800 cfm Q-jet modified as per Cliff Ruggles book. 87 F350 6.9 4 speed dually A poor man has poor ways. |
#11
|
||||
|
||||
just sitting on the side for your update...cool tool
__________________
color me gone |
#12
|
||||
|
||||
http://www.hayneedle.com/product/hoo...FSgQ7Aod0ycAjA
http://www.amazon.com/Heininger-5550.../dp/B000R97782 Company product info http://www.heininger.biz/garagemate_hoodhoist.php#_self
__________________
69 OHC ZH Sprint Hurst 3 Speed 3:55 (1 of 213) 99 Valkyrie 1520cc Flat 6 108hp/110tq - For Sale http://sohcsix.yuku.com/forums/1/OHC-lounge Wanted: 1969 OHC "H" Camshaft |
#13
|
||||
|
||||
My wife would appreciate that. I think it takes a couple years off her life when she helps me with that task!
Shawn
__________________
"Don't let fatigue make a coward of you." |
#14
|
|||
|
|||
Just ordered one from Amazon. I need to replace my hinges, and if it works as advertised, I can do it myself and not have to bother my friends to help out.
__________________
66 GTO, 495, M22, Strange S-60 w/4.10 Sold new at Royal Pontiac. 70 Formula |
#15
|
||||
|
||||
Quote:
Haven't used it yet but it looks like a much improved version of my homemade one. Hope to hear any updates myself...
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#16
|
||||
|
||||
Awesome. I just ordered one.
Thanks. |
#17
|
||||
|
||||
That's neat!
__________________
*** THE BIG BRACE is here *** |
#18
|
||||
|
||||
On sale, 75 bucks isn't bad at all.
__________________
Gary Get in, ShuT Up, Hang On! Member of the Baltimore Built Brotherhood MY GTO built 4th Week of March 1966 "Crusin' Is Not A Crime" Keep yer stick on the ice. |
#19
|
||||
|
||||
When you use it come back and tell us how it went. I am interested in one too.
__________________
69 OHC ZH Sprint Hurst 3 Speed 3:55 (1 of 213) 99 Valkyrie 1520cc Flat 6 108hp/110tq - For Sale http://sohcsix.yuku.com/forums/1/OHC-lounge Wanted: 1969 OHC "H" Camshaft |
#20
|
||||
|
||||
Quote:
I asked my wife to do a brake bleed with me once. In hindsight I would rather drop a hood on my foot than go through that again. She is not a patient and abiding person. It was the last time I asked for her help on car stuff.
__________________
"...ridge reamer and ring compressor? Do they have tools like that?" |
Reply |
|
|