FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
68 GTO Oil dipstick extension tube mounting location
Can someone please tell me the proper mounting location for the oil dipstick tube. It is an AC car. I purchased a dipstick Part# 00480843 but it does not line up with anything. The engine is a 1972 455 and I am installing the original AC compressor and brackets. Everything lines up except for this dam dipstick extension tube.
|
#2
|
||||
|
||||
My 68-400 is bolted to the ac bracket.
|
#3
|
||||
|
||||
There were three+ versions of that bracket between 68-70. I have 5 69's with AC and all are virgin cars and there are two different arangements just in that model year.
I think the new version still sold by GM has to be tweaked to catch the AC bracket. If nothing is close just trim the bracket on the tube and place (rebend a bit if necessary) the tube between the valve cover and the AC bracket so that it can not move around much. I did it years ago on a car I added AC to and it worked fine (I tacked the upper tube to the lower one with a quick touch from a TIG welder so it would not come loose)
__________________
My Break Away Squad 1969 Fbird (Base, 350, 400HO & Sprint Cvt’s - 400HO & TA Hardtops) 1969 LeMans (2dr & 4dr Hardtop and a Cvt) 1969 LeMans Safari 2 seat Wagon 1969 GTO (2 Cvt, 2 Hardtops & Judge Hardtop) 1969 Catalina (3 Cvt’s & a 2dr hardtop) 1969 Ventura 2 Seat Wagon 1969 Executive 4dr Sedan 1969 Bonnie Cvt 1969 Bonnie 3 Seat Wagon (2 of them) 1969 Bonnie Brougham (4dr Hardtop & Cvt) 1969 Grand Prix SJ (2 of them) 1969 2+2 2dr Hardtop (Canadian model) |
Reply |
|
|