FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Darksider makes it into 11s
http://myspacetv.com/index.cfm?fusea...deoid=27369401
Just wanted to say thanks to those that offered their suggestions/hints/ideas regarding the KRE 85cc/260 we recently installed on our P-Dude powered 455 Catalina. Out of the box my son Rob posted a new best of 11.74 @ 114 with a 1.60 sixty foot. Not bad for a two ton plus land barge on 235 wide tires. Also posted the link above of one of our runs, this one against a Z06 'Vette. Again, thanks for the help. Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#2
|
||||
|
||||
Very respectable--congrats
__________________
fasteddy |
#3
|
||||
|
||||
Man, that big bomb leaves pretty good. And you got the holeshot on that vette.
Bada$$. |
#4
|
||||
|
||||
That video was sweet!!!
That vette probably never saw a holeshot like that before........ and from a car his grandpa might be driving!!!! That is one nice, FAST Cat. VERY IMPRESSIVE! I am just sittin' here at lunch with a grin on my face. THANKS. PHILLYGOAT
__________________
PHILLYGOAT 1965 GTO/ OEM Block, Crank & D-ports(all slightly modified of course)/ 3550lbs/ Full Exhaust/ Foot Braking 1.41 60ft 6.45@104.97mph 10.25@127.12mph(Pontiac Heaven) More Details on GOAT http://www.pontiaczone.com/forum/vbpicgallery.php?do=view&g=379 GTO Burnout http://www.youtube.com/watch?v=nZqdcH0Ltc4 |
#5
|
||||
|
||||
Nice !! With a 1.60 60' that's jumping.....I take it you didn't have any traction issues ?!!
Get ready for a roll bar.... It never ends.....tens are next !!
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#6
|
||||
|
||||
I herd the announcer say this was going to be close, not even. That Vette really got his doors blown off. Nice!!!
|
#7
|
||||
|
||||
Thats awsome Jim!Those KRE heads do work,what did you pick up .4?I bet you still have a grin on your face!
__________________
Mark 1970 Lemans Convertible,462,6x-4, 234/242 cam.3.42 posi.12.55@109,4100 lbs...SOLD.... 1968 Firebird , 467 , KRE d-ports ,stock type suspension,3100lbs (1.30 60')(6.08 1/8)(113.43)different runs 9.59 @140.71 on E85 all motor 8.97@148.63 on 150 shot |
#8
|
|||
|
|||
NICE leave! Its fun to ask the z06 guys how much their car cost
Deb says THAT is cool. Thats how Chevys are supposed to look |
#9
|
||||
|
||||
Quote:
Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#10
|
||||
|
||||
Damn!!! That was awesome!! Congrats!! That thing really takes off!.. Maybe I should go roller! wow!
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
#11
|
||||
|
||||
Quote:
Hope to see you and that fast flyin 'Bird at the track sometime. Thanks, "Still Grinnin" Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#12
|
|||
|
|||
Them B bodies leave hard! Sons 64 BVille brougham 4 dr only mild 389 but with 3.08(open) and superhydramatic he 60's 1.9's on regular 235/70-15s (8.30's in 1/8). He's building a motor similar to yours. Should be fun.
|
#13
|
||||
|
||||
Jim,hope to see you guys again at Old Town in a few weeks,I should have the Lemans there.
__________________
Mark 1970 Lemans Convertible,462,6x-4, 234/242 cam.3.42 posi.12.55@109,4100 lbs...SOLD.... 1968 Firebird , 467 , KRE d-ports ,stock type suspension,3100lbs (1.30 60')(6.08 1/8)(113.43)different runs 9.59 @140.71 on E85 all motor 8.97@148.63 on 150 shot |
#14
|
||||
|
||||
WOW! that was awsome !!!!!
__________________
69 Grand Prix 428 H.O. loaded "J" 11.51 @ 116 |
#15
|
||||
|
||||
That's what I'm talking about !
That big beautiful poncho is BAD ASS ! Most corvettes are very annoying, so this is particularly sweet. I bet that the guy in the vette was thinking "hmmm, I'll smoke this Grandpa Joe car by at least 10-15 car lengths" LOL LOL LOL Now it's time to go whup some Viper butt. When ya gonna do that ?
__________________
Knock Knock Knockin' on 11's Door '70 Judge, Palladium Silver w/Red Interior Powered by SD Performance, Ported 6X Heads 501 HP, 554 ft lbs TQ 12.14 ET @ 114 MPH , Supercase Muncie M22, 3:55 Suspension: HO Racing, BMR< Sykorat, and Bilsteins Narrowed 12 bolt , 16x8 VintageWheel Works, Comp T/As on street, MT Drag Radials @ Strip http://www.sdperformance.com/custome...1.php?carID=42 |
#16
|
||||
|
||||
Quote:
Going to look at some 28" tires soon as you suggested. "Tens are next !! - don't give my son any ideas !! Thanks, jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#17
|
||||
|
||||
Silver Judge - Actually Rob had beat a couple of Vipers before the head change. Viper owners [for the most part] are like Vette owners - they don't know how to race their cars. That being said there are a couple of high 11s Vipers that come to the track on occasion - I think my son Rob wants to go snake hunting.
Thanks, Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#18
|
||||
|
||||
Great run, I love watching youtube racing video's of forum members cars. Care to share a little more on the combo and rear gear.
Congrats. on a killer looking car that runs that hard. |
#19
|
||||
|
||||
Quote:
__________________
Knock Knock Knockin' on 11's Door '70 Judge, Palladium Silver w/Red Interior Powered by SD Performance, Ported 6X Heads 501 HP, 554 ft lbs TQ 12.14 ET @ 114 MPH , Supercase Muncie M22, 3:55 Suspension: HO Racing, BMR< Sykorat, and Bilsteins Narrowed 12 bolt , 16x8 VintageWheel Works, Comp T/As on street, MT Drag Radials @ Strip http://www.sdperformance.com/custome...1.php?carID=42 |
#20
|
||||
|
||||
thats fast!!!! thats quicker than alot of the gto's on this site
__________________
http://performerrpm.myphotoalbum.com/view_album.php? |
Reply |
|
|