FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
New 305" Whipplecharger
I know it just came out this January but does anyone have any info on this unit? Its a direct replacement for GMC style roots blowers. Seems like a good option for an efficient supercharger that will work with existing blower manifolds, linkage, etc.
http://www.whipplesuperchargers.com/...essrelease.pdf . |
#2
|
||||
|
||||
Hmmm, A twin screw that will fit on a Pontiac! Thats got my attention!
|
#3
|
||||
|
||||
With an adiabatic efficiency of 75-76% its right there with most centrifugals and turbos, but with the low end boost of the roots. Now if I could just get it to fit under my hood....
__________________
1967 Firebird ragtop, 464, Weiand 8-71, ported 6H heads, Hyd roller, 4L80E, paddle shifter, Moser 9", Cal-Tracs, Vintage Air, Corbeau seats, 13"/12" disk brakes, Hydraboost, electric cutouts and M&H drag radials. |
#4
|
||||
|
||||
Quote:
|
#5
|
|||
|
|||
|
#6
|
||||
|
||||
Lets see, call Bob or Frank at AllPONTIAC FOR BLOCKCrank, etc., call for this new blower, get everything in, together, and into car. go to track,get throwed out of gateway for running too quick, grin all the way back home.
Clearly worth checking into doing!!! |
#7
|
||||
|
||||
Art and Bennie have been playing with the larger supercharger for some time.
I know of a couple of "projects" where that unit is being tested. LOL! Glad Whipple is doing something in that area for larger engines. For a street car the unit would work great. The older 3.3 Liter unit would move about 70 lbs of air/minute so the 5.0L (300 cid) unit will move more naturally. 70 lb/min is 700 hp before you take away the 125 hp to drive it. 3.3L would make about 575 at the crank. 5 Liter blower will make more, like 50 % more so 575 + 285 more = 860 hp. Lots of centrifugals will make more HP on the top but the Screw will make great HP in the Pontiac rpm range of 1000-6000 rpm. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#8
|
||||
|
||||
Tom, Would this be the supercharger to use to make a solid 2000 hp with?
|
#9
|
||||
|
||||
Nope, WAAAAY too small. Just a good street piece. Unit will just not move that much air. The PSI blowers will make the HP though.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#10
|
||||
|
||||
Thank You Tom.
|
#11
|
||||
|
||||
Food for thought, a 6-71 roots blower has around 400 cubic inches of volume per revolution. Pontiac Jack had the real numbers at one time, I can't remember what they are right now. I know that blower will not make 2000 hp so how could a 300 cid screw blower make that kind of hp.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#12
|
||||
|
||||
Tom, any word on the Vortech kit for a Pontiac??
|
#13
|
||||
|
||||
Roots blowers all the way baby!!!!!
__________________
You know it's going to be a good day when you wake up breathing! |
#14
|
||||
|
||||
Quote:
"Tom, any word on the Vortech kit for a Pontiac??" I asked the design engineer that question yesterday and he said they have the car (65 GTO) in the garage and are working on the project. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#15
|
|||
|
|||
Screw Superchargers rule all!
Great Article on Norm Drazy: http://www.northernthunder.com/turningscrews.html Whipple probably should've designed this a little bigger/inlet looks less efficient than what Norm Drazy pioneered... Drazey told me after the screw supercharger blew up and NHRA banned the PSI design(RCD made pulleys to spin the cast rotors faster than Norm suggested ...Troxel?http://youtube.com/results?search_qu...&search=Search) that he made the screws out of billets and the PSI wouldn't explode at max RPM but actually sieze(33000 or so RPM). So depending on what material Whipple has used for the rotors and actual max rpm, the air volume amount seen in the manifold/hp can possibly go up a bit more. Yea it's not a 2000hp setup, unless you ran maybe two of em...Quads. http://www.whipplesuperchargers.com/...sp?ProdID=1179 -Rob WWW.ICTCengines.com |
#16
|
||||
|
||||
Just add a shot of n2o to get that 125hp back
__________________
If you cant drive from gas pump to gas pump across the map, its not a street car. http://s207.photobucket.com/albums/b...hop/?start=100 |
#17
|
||||
|
||||
They are certainly not cheap. Whipple has set the MSRP at $6,350 for the base blower (no drive system), $8k for the blower with a 16 rib serpentine belt drive and $12k for a top of the line intercooled model.
|
#18
|
||||
|
||||
Rob,
Norm came to see me about 5 years ago and brought a blower with him to show me. He hauled the thing into the building on a two wheel push cart, LOL! Yep! Norm is a sharp guy. I heard a rumor that Lysholm was sold or in the process of being sold. I guess Art, Corky, and Jerry have been kicking their butts on sales. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#19
|
||||
|
||||
I could swear that I've seen info about a guy running twin whipplechargers
in a pretty radical and rare Buick GSX car. I think it was a street strip car that ran 9's. Can you say TwinWhippleChargers 3x fast ?
__________________
Knock Knock Knockin' on 11's Door '70 Judge, Palladium Silver w/Red Interior Powered by SD Performance, Ported 6X Heads 501 HP, 554 ft lbs TQ 12.14 ET @ 114 MPH , Supercase Muncie M22, 3:55 Suspension: HO Racing, BMR< Sykorat, and Bilsteins Narrowed 12 bolt , 16x8 VintageWheel Works, Comp T/As on street, MT Drag Radials @ Strip http://www.sdperformance.com/custome...1.php?carID=42 |
#20
|
||||
|
||||
$6350 for just the blower? Yikes! That's alot of money for a small blower, even a new one. There's a 14-71 standard helix Kobelco that was refurbished by RBS right now on EBAY with a buy it now price of $2800. That Kobelco will support a sh!tload more HP than this Whipple.
__________________
Just a blind squirrel looking for a nut. |
Reply |
|
|