FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
I'm creating a fuel map for my car and I wanted some input on what RPM you think the peak hp and peak torque would be. And if you what to take a guess and the flywheel hp/torque, by all means. I should be able to get to a dyno soon but first gotta get the map close enough so she runs good. Only estimates without the blower or juice please...one thing at a time.
http://hometown.aol.com/nylewis/ta.html
__________________
http://hometown.aol.com/nylewis/ta.html |
#2
|
|||
|
|||
I'm creating a fuel map for my car and I wanted some input on what RPM you think the peak hp and peak torque would be. And if you what to take a guess and the flywheel hp/torque, by all means. I should be able to get to a dyno soon but first gotta get the map close enough so she runs good. Only estimates without the blower or juice please...one thing at a time.
http://hometown.aol.com/nylewis/ta.html
__________________
http://hometown.aol.com/nylewis/ta.html |
#3
|
|||
|
|||
No one has any clue....
__________________
http://hometown.aol.com/nylewis/ta.html |
#4
|
|||
|
|||
OK Paul, I'll guess and then the experts can chew me up and spit me out...
How about peak HP at 6200, peak TQ at 4800? That's just off the top of my head, I didn't take the time to model it with software. To guess at peak values, I'll say 560hp and 540tq. Just my friendly entry in the dyno lotto! Jeff |
Reply |
|
|