FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Anybody know what parts it would take to change my 81' front end into a 70'-72'? I know fenders, nose, radiator support, but is there anything else? I wouldn't imagine that I would need the whole subframe, but, you never know untill you ask.
|
#2
|
|||
|
|||
Anybody know what parts it would take to change my 81' front end into a 70'-72'? I know fenders, nose, radiator support, but is there anything else? I wouldn't imagine that I would need the whole subframe, but, you never know untill you ask.
|
#3
|
|||
|
|||
You should be able to use the same rad support, but you'll also need a 70-76 hood.
You might want to check on the hood to cowl seal- the earlier (pre 77) cars used a different seal. Oh yeah, the 70-73 cars had a special tab for attaching the lower valence panel. ------------------ John
__________________
John IG: @crawdaddycustoms YouTube: https://www.youtube.com/channel/UCK9...Nc_lk1Q/videos |
#4
|
|||
|
|||
Thanks John.
|
#5
|
||||
|
||||
Hi, this is only a test post to see if the pic shows up.
Pete S.
__________________
Peter Serio Owner, Precision Pontiac |
Reply |
|
|