FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Does anyone have info on quality of the floorpans offered by NPD?
I have to do some replacement of sections of my pans and want to get them from NPD as I live about 45min from there warehouse and should be able to save a bundle on shipping costs. I don't want to skimp on quality however. So, if anyone has used these replacements or have any info, it will be greatly appreciated.
__________________
Barry |
#2
|
|||
|
|||
Does anyone have info on quality of the floorpans offered by NPD?
I have to do some replacement of sections of my pans and want to get them from NPD as I live about 45min from there warehouse and should be able to save a bundle on shipping costs. I don't want to skimp on quality however. So, if anyone has used these replacements or have any info, it will be greatly appreciated.
__________________
Barry |
#3
|
||||
|
||||
I perfer the off shore pans because they come with a longer toe section. The US 1s I've used before only came up about an 1" which meant I had to make a patch. But then again If I lived 45 minutes away I'd drive down and pick the 1 I wanted. Alan
|
#4
|
|||
|
|||
My toe sections are fine, it's the depressed areas of the pans that are rusted through. I guess I'll drive out there and take a look.
Thanks,
__________________
Barry |
#5
|
|||
|
|||
Get the one-piece floor pan. They're great and fit perfectly..
|
#6
|
|||
|
|||
I replaced the pass floor and shock tower with no problem using NPD pans.
__________________
Gripping the wheel, his knuckles went white with desire! The wheels of his Firebird exploding on the highway like a slug from a .45. True Death: 400HP maximum performance piercing the night; this is BLACK SUNSHINE!!! |
Reply |
|
|