 |
|
| Pontiac Business Entities Exchange Sources, Compliments and Grievances in regard to Pontiac parts or services rendered by an individual or business. |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
02-04-2008, 05:43 PM
|
||||
|
||||
Anybody have dealings with thepartsplace.inc
Anybody have dealings with this company? They have a ram air setup with metal pans and correctparts for pretty reasonable sounding $ Just wondering if i should go this route?
|
|
#2
02-04-2008, 05:51 PM
|
|||
|
|||
|
I deal with them all the time. Talk to matt, he knows alot about there parts. He helped alot with the restoration of my gto.
|
|
#3
02-04-2008, 06:55 PM
|
||||
|
||||
|
I bought a set of Hurst repros from them and they delivered a quality product to my door in one piece and without issue.
__________________
1967 GTO Tyrol Blue/Blk Cordova 400, TKO-600, 8.2 Posi w/3.55 400 + .020, decked to .005 SD Performance 240+CFM 670 heads RARE HO/RA manifolds RARE 2.5" Exhaust (18" Magnaflows) SD "Stump Puller" HR cam (230/236, 112LSA, 107.5 ICL) PRW stainless 1.52 roller rockers Forged TRW slugs SCAT H-Beam forged rods |
|
#4
02-04-2008, 08:42 PM
|
||||
|
||||
|
PP Inc
Got several little parts, so far so good. They are reproducing some cool hard to find stuff that some others don't have....
|
|
#5
02-04-2008, 09:26 PM
|
|||
|
|||
|
also a set of Hurst repop wheels,No problem.Tom
|
|
#6
02-04-2008, 09:49 PM
|
||||
|
||||
|
Great place to deal with. Every part that i couldnt get at NAPA for my 69 gto came from the parts place. I agree that matt or sean are the people to talk to.
__________________
1969 GTO. Full rotisserie restoration "completed" in 2014. 5.3L "LM7", TKO600, 3.55's out back. Big cam coming soon. 
|
|
#7
02-04-2008, 10:54 PM
|
|||
|
|||
|
andyg, how do you like the cam? Im installing one in my 1970 vert.
|
|
#8
02-05-2008, 06:10 PM
|
||||
|
||||
|
I do 90% of my ordering from PY, but I had a 10% off coupon and did place a big order with TPP and it arrived without issue. Also ended up with a set of their Hurst wheels and they are quite nice.
I have heard some horror stories though...
__________________
Matt 1962 Grand Prix - Cameo Ivory|389 4sp|One-Owner Survivor 1964 GTO HT - Silvermist Grey|389 3x2s 4spd|A/C|Hurst Wheels|Frame-off|SOLD 1965 GTO Post - Mayfair Maize|421 3x2s TKO600|Pro-Touring| 1966 GTO HT - Barrier Blue|389 3x2s 4spd|Red Fenderliners 2005 GTO Coupe - Yellow Jacket|Magnacharged LS2 6sp|543hp/561tq|SOLD 2006 GTO Coupe - Spice Red|LS2 6sp|20k orig miles |
|
#9
02-05-2008, 08:13 PM
|
|||
|
|||
|
I too have bought about a dozen or so parts from them. Their parts quality is top notch and they ship the parts rather fast.
|
|
#10
02-05-2008, 08:20 PM
|
||||
|
||||
|
Never had a problem with them; good quality parts!
|
|
#11
02-05-2008, 08:48 PM
|
||||
|
||||
|
highly recommended.
|
|
#12
02-06-2008, 12:40 AM
|
||||
|
||||
|
bought my tri power intake and carbs from them. went great
|
|
#13
02-06-2008, 10:49 AM
|
||||
|
||||
|
If you search this site I'm sure you hear LOTS of stories. It's 50/50 on experiences with them from what I've seen. I'm also on a few other sites and it's the same there, 50/50 on experiences.
Quote:
__________________
http://gloryrestoparts.20megsfree.com/ 1970.5 Pontiac Tempest GT-37 400ci 4bbl 4sp 3.90:1 12.73 @ 112.42 2011 Pure Stock Drags 12.71 @ 110.58 2013 Martin FAST/FS race 12.70 @ 111.74 2014 Pure Stock Drags 12.60 @ 111.66 2015 Martin FAST/FS race 1968 Pontiac Firebird 400 TH400/3.08 open export car - factory heater delete 14.48 @ 95.86 w/ 2.14 60' 2018 Pure Stock Drags 14.47 @ 95.02 w/ 2.16 60' 2019 Martin FAST/FS race |
|
#14
02-07-2008, 12:42 AM
|
|||
|
|||
|
RAM AIR PARTS
warpath's in ohio much better quality
|
|
#15
02-07-2008, 12:54 AM
|
|||
|
|||
|
Warpath does have a lot of nice stuff.Tom
|
|
#16
02-08-2008, 01:12 AM
|
||||
|
||||
|
If your talking about the 1969 and 1970 Ram Air system.The 'New' reproduction that was -just- released is by far the best quality and accurate Ram Air pans on the market. I recently installed one and compared to an original it is absolute correct. The ones at Warpath are nice but the Parts Place is right on(by the way some of the items sold by Warpath in there kits are from Parts Place!).
|
|
#17
02-08-2008, 11:58 AM
|
|||
|
|||
|
69/70 RAM AIR
this has to be parts place or a friend of theres because what he's saying is just not true. the only thing that comes from parts place is the hood scoops and that is why they are not included in the system. they are imported from whereever. i know this for a fact because i work at WARPATH. at WARPATH we don't hide behind fictitious names or secret id.
|
|
#18
02-08-2008, 12:14 PM
|
||||
|
||||
|
Quote:
i can't find it. thanks, david |
|
#19
02-08-2008, 05:08 PM
|
|||
|
|||
|
I've got one of their fiberglass 69 Trans Am hoods. Oh mama, what a piece of work that thing was. The fiberglass scoop inserts did not fit worth a damn and the edges were full of bondo. I don't know how many hours went into making that thing work but it was a lot.
Don |
|
#20
02-08-2008, 06:55 PM
|
||||
|
||||
|
Quote:
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
