[Half-Inch Stud]

Who knows?
Cudo's to Stan Weiss. Here's Vizard 730 HP sbc with images of Stan's IOP tool in use.
https://www.youtube.com/watch?v=89MMWRGkWZo

[Stan Weiss]

Originally Posted by Half-Inch Stud

@ Stan; the Induction Optimization Program IOP seems interesting.

Mark,
While that was a fun project to work on with DV the best thing was that I got to learn some new things.

Stan

[Stan Weiss]

Originally Posted by 68azbird

So how much power did these heads make on a 406 cubic inch pontiac?
Intake flow
@28 h2o
.100 = 75
.200 = 144
.300 = 189
.400 = 205
.500 = 209
.600 = 209

Exhaust flow
.100 = 53
.200 = 107
.300 = 147
.400 = 169
.500 = 167
.600 = 182

162 cc intake port volume

Much more information is needed to guess HP. What is the use? Street, Street/Strip, Full race. What is the CR,

Just WAG. 10.5:1 CR, 485 HP @ 6825 RPM.

Stan

[Half-Inch Stud]

Are you able to send copies of IoP and Torque Master?

[Stan Weiss]

Originally Posted by Half-Inch Stud

Are you able to send copies of IoP and Torque Master?

Mark,
Because of how busy David is and somethings that have come up the Torque Master software is not available at this time.

Stan

[bankbook]

Originally Posted by slowbird

Any pictures?

Will get them uploaded.