[Ccass]

Can anyone tell me what type of clamp held the heater hose to the heater control valve on 70-72 cars w/ac? Also was there a bracket that held the control valve in place?

Thanks.

[Ccass]

Can anyone tell me what type of clamp held the heater hose to the heater control valve on 70-72 cars w/ac? Also was there a bracket that held the control valve in place?

Thanks.

[Jerry]

Chris, you are the fastest typer in the trade! I was going to ask the same question.......Jerry

[TinInjun]

Ccass:
There is a bracket that holds the heater control valve on the '70 and the clamps on mine are the tower type. Can't say that the clamps are the same on all '70s. Mine is an early model built on 11/69 and does have some carryover '69 stuff in it.

------------------
"Run wild with an Indian, not with the crowd in a Chevy"
Check out my restoration at http://members.aol.com/jetmech15/gto

[TinInjun]

Here is a picture of the bracket that holds the heater control valve. The clamps are not visible, but you can see the screw portion of the tower type clamp just behind the bracket.



------------------
"Run wild with an Indian, not with the crowd in a Chevy"
Check out my restoration at http://members.aol.com/jetmech15/gto

[Ccass]

TinInjun...Thanks. A picture IS worth a thousand words. I couldn't picture how it mounted. I knew there wasn't a bracket on the valve itself. Can anybody confirm the tower clamps on a 71? 72? thanks.