FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
comp solid roller lifter diffetences
i bought a set solid rollers years ago on here. 13 were rebuilt but 3 were replaced by comp. i have 13 like the one on the left. 3 of the other. i have another set of 16 like the one on the right. so im good keeping 3 spares to that set. is the type on the left still available? id like to find 3 to go with these so i could use without 2 different length pushrods....
i think badhbt was the username i bought these from come to think of it
__________________
http://performerrpm.myphotoalbum.com/view_album.php? |
#2
|
||||
|
||||
picture flipped...the shorger one is the one im calling on the left
__________________
http://performerrpm.myphotoalbum.com/view_album.php? |
#3
|
||||
|
||||
Quote:
|
#4
|
||||
|
||||
i bet it was close to 14 years ago i bought thes. been in a box all this time. originally i did have the comp cams invoice from the rebuild. they have never been ran since. i have another set of 16 tbat i plan to send in
__________________
http://performerrpm.myphotoalbum.com/view_album.php? |
#5
|
||||
|
||||
https://forums.maxperformanceinc.com...d.php?t=537539
this is how long its been.. i was reading this thread and pmed him on them shortly after this...wow time flys.... guess after re reading that post...i just need to see if someone has 3 old styles
__________________
http://performerrpm.myphotoalbum.com/view_album.php? |
#6
|
|||
|
|||
I ran a solid roller with a different brand of lifters in the # 1 hole. Had 2 different length pushrods, ran great. Engine did not know the difference.
|
Reply |
|
|