FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Qjet Connection Help
I'm replacing a Holley 4175 with a Qjet and have questions about the connections on the Qjet. There are no similar connections on the Holley.
I've circled the ones I don't know what connects to them, front and rear of the Qjet. Do I just cap / plug these? Thanks in advance for any replies.
__________________
Mark Las Cruces NM ___________________________ Current Project: '67 Catalina Convertible 400 4-spd |
#2
|
||||
|
||||
Well that’s not a Pontiac carb first off, but that being said, that big front Top 3/8” nipple is for the fuel bowl vent to the charcoal tank which you do not have I will assume.
The other two smaller ones I forget if they are full manifold vacuum or ported. If no one else can give you a answer for those two then just cap then, start the motor a check when they work . I think I recall that on that type of Q jet the rear one on top goes to either the air cleaner or it auto trans vacuum. Sorry, that’s all the help I can offer!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
The Following User Says Thank You to steve25 For This Useful Post: | ||
Reply |
|
|