FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
name this holley part
Putting a kit in a Holley. I've had a few apart and I know what most of the stuff in the kit is, but I don't recall seeing one of these before. What is it and what does it do?
|
#2
|
|||
|
|||
Dont know text book name but it takes the accelerator pump shot from metering plate to main body on some models not all
__________________
A man who falls for everything stands for nothing. |
The Following User Says Thank You to Formulas For This Useful Post: | ||
#3
|
||||
|
||||
I think it fits between the metering block and the main body on some models if i remember right.
|
#4
|
||||
|
||||
Ok cool. Carb is an 870 street avenger, I did the primary side already and didn't see anything like this piece in there. Maybe it's a kit that fits some other carbs as well.
|
#5
|
||||
|
||||
Part Number from Holley is a 52R-88 and the part is a "Fuel Transfer Tube".
It was used on a lot of Spread Bore Holleys, in the old days, not so much on the Square Bore Holley carbs. That part number is actually for the Tube and two O-Rings. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#6
|
||||
|
||||
awesome, thanks Tom. This is a square bore carb.
|
#7
|
||||
|
||||
You said it was a Street Avenger carb and I quit paying attention to those carbs years ago.
I am a Square Bore, 4776,4777,4778,4779,4780,4781 type of guy. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#8
|
||||
|
||||
Yeah one of these days I'll pick some old double pumpers up on craigslist and mess around. For now, this is on the shelf and looks to be in good shape, so I'm gonna give it a shot.
|
Reply |
|
|