FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Canton tray and pan install?
Got Canton pan 15-452 and matching tray. Hows this sound for a leak free install:
Lay a bead of Right Stuff down, install tray, finger tighten the nuts on oil pan studs to secure tray. The rear main I'll glue a cork gasket to cap, temp install pan until gasket adhesive sets up. Next day, glue gasket to pan and block, finger tighten nuts for studs. Next day torque pan to about 12lb. Use Right Stuff for everything also using Milodon gasket (clams to be crush proof)
__________________
This world is your world, so take it, but take it easy. |
#2
|
|||
|
|||
Sounds like a good plan!
__________________
SJM |
Reply |
|
|