FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Crank ??'s
I have found what appears to be a deal for some crankshafts. Two Crankshaft for $100 is this a fair price ???? I dont need them but wouldnt mind sitting on them for the future.
496453...... {73-76}455 9773524......{67-68}400 Both in good condition Second part of the question, what is an average machine cost to have a crank checked,cleaned & balanced. thanks as always for the info. |
#2
|
||||
|
||||
Very good price, if they have not been turned undersize yet and are not cracked.
|
#3
|
||||
|
||||
Last invoice I have shows $149 for checking and grinding crank next undersize. Crank is balanced to pistons, rods, rings and bearings - so that would come after accumulating all the parts just before the build starts. Last balance cost $155.
__________________
Mick Batson 1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 2+2 survivor AC auto -- 1965 Catalina Safari Wagon in progress. |
#4
|
||||
|
||||
The 524 is a good armastell crank, I hope its checks out as not being cracked for you, but first and formost, make sure they have not been cut more than 10/10 already and write up a sale bill that lets you return eitheir if it fails the Mag test!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
Reply |
|
|