FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
My old pump gas Combination
Back in 2007 I’ll post the dyno numbers then the flow sheet.
__________________
|
#2
|
||||
|
||||
Here’s heads flow sheet.
__________________
|
#3
|
||||
|
||||
Do you have the weather data from that pull?
Looks like a 7% correction factor!
__________________
I do stuff for reasons. |
#4
|
||||
|
||||
Steve sorry I don’t.
__________________
|
#5
|
||||
|
||||
Great Hp at 5200, and well all across 4500-6500. What octane pump gas?
__________________
12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
#6
|
||||
|
||||
93 octane.
__________________
|
#7
|
||||
|
||||
Lou,
This looks somewhat like a dyno sheet you and I PMed about maybe a year and a half ago. Glad to see you finally found a more accurate version. Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
#8
|
||||
|
||||
What did the car run with that combo? If you don't mind sharing
|
#9
|
||||
|
||||
Those dyno numbers were with this unported Victor intake as you can see, the intake was just port match to the heads.
__________________
|
#10
|
||||
|
||||
I later change over to this fully port Victor intake, and it pick up close to 30 hp.
__________________
|
#11
|
||||
|
||||
First pass off the trailer it went 9.80 @ 136 mph. With 1.418…60’
__________________
Last edited by Gach; 07-10-2022 at 08:21 PM. |
#12
|
||||
|
||||
On rev limiter it kept saying Lou shift me..lol.
__________________
|
#13
|
||||
|
||||
Best pass was 9.45 @ 140.76 with 1.31…..60’ that’s with new intake.
__________________
|
#14
|
||||
|
||||
I posted this, to encourage guys that you can easily make 750-760 hp on pump gas with a Pontiac. with unported Victor intake. It’s not a big roller either, 264/276 @ .050 with 729 lift on a 112 lobe. Though closed exhaust. And for me perfectly street able. What street able is different for others
__________________
|
#15
|
||||
|
||||
That pass was at Atco Pontiac race event, first picture is with Bob and Frank from Alpontiac John Langer, Scott Rex and Haffman standing in front of the car in staging Lane. Scott Rex was stage behind me ready to make his pass.
__________________
|
#16
|
||||
|
||||
That’s John Langer standing behind me staging area me getting ready to make next and best pass. 2008
__________________
|
#17
|
||||
|
||||
Tire again
__________________
|
#18
|
||||
|
||||
This is a great thread. Thanks for posting it Gach.
Here is a link with more details on this build's performance. Post 26 talks about the intake manifold change. https://forums.maxperformanceinc.com....php?t=649157& Good reading for sure! |
#19
|
||||
|
||||
Initially I was running 3” Dr Gas cross over with 3” mufflers
__________________
|
#20
|
||||
|
||||
Then I changed over to 2”-4” merge collector with 4” exhaust and 4” bola mufflers.
__________________
|
Closed Thread |
|
|