#1  
Old 03-03-2023, 05:13 PM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default BOP TH350s for sale

I have (2) TH350s for sale. Both are short tail BOP bellhousing. I'm going TH400 and don't need these.

Built TH350 $1100 OBO

The first was rebuilt by me in about 2018 and never used. It has most of the upgrades for a high HP Lemans/GTO.
hardened input shaft
36 element intermediate sprag and hardened race
4L60E bolt-in center support
pistons machined for 5 clutches
quality clutches/steels
performance clearances
all new bushings/bearings/seals
Transgo stage 2 shift kit for auto or manual shifting.
cast aluminum deep pan
red stripe modulator
replacement gov with yellow springs
Comes with extra tailhousing, apply pistons cut for 5 frictions and a box of gaskets and small bits.


Built but damaged TH350 $200 OBO

The other tranny is built just like the first, except it has a stock input shaft, stock TH350 intermediate sprag and hardened race. It was run street/strip for a few years. The tranny rolled the sprag and cracked the bellhousing on a nitrous pass, so it's parts only. Most of the internals, VB and pan still good. Could be fixed with an ultrabell.

Buy both for $1000. Act now and I'll throw in the home-made holding fixture that fits an engine stand. Both trannys are in the Aiken SC/Augusta GA area. Local pickup only. PM if interested.
Attached Thumbnails
Click image for larger version

Name:	IMG_20230223_000925106.jpg
Views:	159
Size:	53.5 KB
ID:	608266   Click image for larger version

Name:	IMG_20230223_000949202.jpg
Views:	133
Size:	55.1 KB
ID:	608267   Click image for larger version

Name:	IMG_20230223_001225211.jpg
Views:	127
Size:	26.5 KB
ID:	608268  

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25

Last edited by chiphead; 03-03-2023 at 05:22 PM.
  #2  
Old 03-27-2023, 03:54 PM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Bump

I found some of the receipts for the parts used, like the hardened input shaft and fwd drum.

Built th350 $900 obo

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
  #3  
Old 04-11-2023, 11:30 PM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Bump

Built unit $750 OBO. Cost me more than that to build it.

Parts unit $125 OBO. Good center support, planets, clutches, VB, pan, etc.

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
  #4  
Old 04-27-2023, 01:17 PM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Bump

I can provide more pictures. For an offer close to asking price, I'd be willing to pull the front pump and take pics/doublecheck internal clearances.

Make me a fair offer for both, I need the space.

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
  #5  
Old 05-06-2023, 10:37 AM
grandam1979 grandam1979 is offline
Ultimate Warrior
 
Join Date: Feb 2005
Location: Ohio, Findlay
Posts: 1,429
Default

Are you coming to Norwalk this year?

  #6  
Old 05-06-2023, 08:51 PM
ta-69's Avatar
ta-69 ta-69 is offline
Senior Chief
 
Join Date: Jan 2007
Location: New Hampshire
Posts: 291
Default

Pm sent

  #7  
Old 05-22-2023, 08:39 AM
ta-69's Avatar
ta-69 ta-69 is offline
Senior Chief
 
Join Date: Jan 2007
Location: New Hampshire
Posts: 291
Default

Is the transmission still for sale?

  #8  
Old 05-24-2023, 11:10 AM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Yes, its still available. I didn't see a PM, sorry! Send me a PM or leave a message here and I'll get back to you. I'm not going to Norwalk but maybe we can work something out.

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25

Last edited by chiphead; 05-24-2023 at 11:18 AM.
  #9  
Old 05-24-2023, 12:55 PM
ta-69's Avatar
ta-69 ta-69 is offline
Senior Chief
 
Join Date: Jan 2007
Location: New Hampshire
Posts: 291
Default

I'm in Hinesville Georgia. You can call me at 603 477 7984. Thanks Jim

  #10  
Old 06-07-2023, 07:37 AM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Built TH350 Sold, thanks PY!

TH350 parts tranny still available. Will part out, PM me with needs.

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
  #11  
Old 01-04-2024, 02:32 PM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Bump Final call before I junk this TH350 parts tranny.

Anybody need hard parts or clutches? Free, just pay shipping from 29803.

Any interest in aftermarket TH350 cast aluminum deep pan, pickup extension and bolts? It's a good pan, drain plug, no leaks. $75 plus shipping

How about the whole valvebody with the Transgo 2 shift kit, includes spacer plates? $25 plus shipping.

I'll post pics when I get a minute. I'll take check, MO, Paypal.

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
  #12  
Old 01-05-2024, 12:19 PM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

I tore the parts tranny down last night. All the internal parts are good. I forgot I put all my good leftover parts in this broken case. Direct drum is good, hardened sprag is good, all the red performance clutches, steels and planets are good, etc. The sun gear and shell are the good, thick ones. Note the BOP specific tail housing and speedo gears.

If you had a good case, you could build a working unit with these parts. Will sell the whole lot or part out.
Attached Thumbnails
Click image for larger version

Name:	IMG_20240104_234859890.jpg
Views:	39
Size:	47.6 KB
ID:	626007   Click image for larger version

Name:	IMG_20240104_234917976.jpg
Views:	33
Size:	48.8 KB
ID:	626008  

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25

Last edited by chiphead; 01-05-2024 at 12:24 PM.
  #13  
Old 01-31-2024, 07:51 AM
chiphead's Avatar
chiphead chiphead is offline
Ultimate Warrior
 
Join Date: Nov 2004
Location: Aiken, SC
Posts: 5,182
Default

Bump

__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum.

White '67 LeMans 407/TH350/Ford 3.89... RIP
Red '67 LeMans. 407/TH400/Ford 3.25
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:32 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017