FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Head Bolt Length
Someone swapped out the stud head bolt where the negative battery cable attaches and I'm replacing it. Ames has 3 different lengths. What's the correct head bolt length here? #13 heads, first cylinder on driver's side for reference.
__________________
1970 GTO I Pepper Green, YS Code, numbers matching, PHS documented |
#2
|
||||
|
||||
It should be about 3/4” longer than the head casting where the bolt goes through. Your measuring tape will tell you which length to purchase.
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/2.56 2002 WS6 Convertible LS1/4L60E/3.23 |
#3
|
|||
|
|||
Car is at paint and I won't have it back for a few months. Was hoping to order the part to be ready when it gets back.
__________________
1970 GTO I Pepper Green, YS Code, numbers matching, PHS documented |
#4
|
|||
|
|||
3 5/8" version on modern Dports in that position.
__________________
Buzzards gotta eat... same as worms. |
The Following User Says Thank You to 'ol Pinion head For This Useful Post: | ||
#5
|
|||
|
|||
Thank you, friend.
__________________
1970 GTO I Pepper Green, YS Code, numbers matching, PHS documented |
Reply |
Thread Tools | |
Display Modes | |
|
|