[Probird]

I've been trying for 3 weeks to get a stand height gage from T&D with no success. Can someone tell me what the difference in height should be from the top of the shaft to the top of the valve? If I can get the measuremant I think I can make one faster than them getting one to me. This is all I'm waiting on so I can measure for pushrods and get this thing back together and back in the car. Thanks.

[RAIV-Z]

Your T&D rockers should have come with a gauge based on the head and rocker ratio they were designed to be used with.

[Probird]

Originally Posted by RAIV-Z

Your T&D rockers should have come with a gauge based on the head and rocker ratio they were designed to be used with.

These came on a set of heads I bought several years ago and I didn't get it with them. Chris sent me a pic with all the dimensions though and I'm in the process of making one. I'll be ordering some new pushrods and putting the new heads on soon.

[Rusty4cyl]

Probird, I have a couple of those. If you PM me your address, I can send you one.Thanks Rusty

[blykins]

I have a couple too if you need one.

Can you just mock up the rockers with a checking spring and adjustable pushrod to see where you need to be on stand height?

[Probird]

Thanks for the offers guys. I really appreciate it. I made one and I've got my stand height figured out and have the correct pushrod length ordered. I hope to be running in the next week or two as long as nothing weird pops up. First test day is the 22nd of April. We'll see if these new heads are any better than the ones I took off.

[gman005]

Good luck Rick