| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-05-2021, 02:03 PM
|
||||
|
||||
Is anyone running the Butler CCA-BP 8040 SP hydraulic roller 242 248 110lsa 540 563
lift cam
Just wondering? |
|
#2
12-05-2021, 02:43 PM
|
|||
|
|||
|
Quote:
I have that cam on a 112 lsa in my 455. Using the Johnson short travel lifters. Have not dyno’d the engine yet but it sounds good.
__________________
1979 TA 541/T56 Magnum 1964 Catalina 462/TKO600 1965 GTO 389/4speed |
|
#3
12-05-2021, 05:30 PM
|
||||
|
||||
|
Due to time constraints not allowing for me to grind my profile, I will be running that grind, also ground on a 112 as previously mentioned, in a 400 based 462 with Edelbrock D-ports and FI Tech Fuel Injection in a customer's build i just started on.
It's a decent grind, the 110ls would come on a bit sooner, and definitely needs good compression. I will be running it with 1.6 Rockers. |
|
#4
12-06-2021, 02:23 AM
|
||||
|
||||
|
I ran it in my 400 before going solid roller. As long as the supporting cast is there (intake, heads, converter, gearing) it's great!
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120 '66 Pontiac GTO - 389, 4 speed street cruiser |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
