FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Derale HO Dual Radiator Fan and Shroud Kit 16825 & controller 16795 for sale
Selling my lightly used derale dual fan and PWM controller. I had this setup on my 1967 GTO for a short amount of time. I fabbed up some brackets so the shroud bolts directly to the factory fan shroud brackets on a 1967 GTO non-AC car. This made for a very clean look. I also added the Derale fan switch kit so it sees water temp instead of the cheesy radiator probe.
Everything worked when I removed it from the car a few months back. Fan setup sells for $315 on summit. https://www.summitracing.com/parts/d...UaAmTBEALw_wcB Controller sells for $168 on summit. https://www.summitracing.com/parts/der-16795/ Asking $380 for everything. Buyer pays shipping. Box dimensions 32x23x6 weight 20lbs. I live in Thousand Oaks CA and work in the San Fernando Valley and am happy to meet somewhere.
__________________
Sean 1967 GTO Koerner built 468 with Edelbrock RP’s 315cfm by Butler, Luanti Voodoo HR 20510713, 4l80e, Holley Terminator EFI |
#2
|
||||
|
||||
More pics
__________________
Sean 1967 GTO Koerner built 468 with Edelbrock RP’s 315cfm by Butler, Luanti Voodoo HR 20510713, 4l80e, Holley Terminator EFI |
#3
|
||||
|
||||
Bump
__________________
Sean 1967 GTO Koerner built 468 with Edelbrock RP’s 315cfm by Butler, Luanti Voodoo HR 20510713, 4l80e, Holley Terminator EFI |
#4
|
||||
|
||||
you have any pics when it was in the car worried about clearance
|
#5
|
||||
|
||||
still interested in the brackets. if you want to move them separately
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#6
|
||||
|
||||
Sorry I don’t have any pics of it in the car but there was easily 2+” of clearance between the water pump pulley and the fans.
__________________
Sean 1967 GTO Koerner built 468 with Edelbrock RP’s 315cfm by Butler, Luanti Voodoo HR 20510713, 4l80e, Holley Terminator EFI |
#7
|
||||
|
||||
hi still interested curious about the clearance i have a 11 bolt pump and later brackets
|
#8
|
||||
|
||||
I sold the brackets, filled a couple holes and painted it black. Here are some new pics.
I don’t know how the later brackets change the pump to fan clearance, but my car is all stock 1967 and like I said earlier, there was a couple inches of fan to water pump clearance.
__________________
Sean 1967 GTO Koerner built 468 with Edelbrock RP’s 315cfm by Butler, Luanti Voodoo HR 20510713, 4l80e, Holley Terminator EFI |
Reply |
|
|