[md1twal3]

In the process of getting parts for my 69 Judge. Donor car is a 68 Lemans 4 door. Looking to take the trunk, rear under seat panel and the entire floor pan. We are aware that there is a few inches difference from 2 to 4 door for wheel base, but so far, we are not finding that difference in any panel that I described.

Can anyone tell me where the difference is between the two? Need to know ASAP.

[md1twal3]

In the process of getting parts for my 69 Judge. Donor car is a 68 Lemans 4 door. Looking to take the trunk, rear under seat panel and the entire floor pan. We are aware that there is a few inches difference from 2 to 4 door for wheel base, but so far, we are not finding that difference in any panel that I described.

Can anyone tell me where the difference is between the two? Need to know ASAP.

[kaysersuzuki]

1 is a 2 door,the other is a 4 door/get it lol

[md1twal3]

wise-apple!!!!!

[Jack Peters]

2 dr = 112 " wheel base
4 dr = 116 " wheel base

Only body parts the same are front clip, trunk, front window (not sure about rear window), and rear bumper/valance (non GTO).

[md1twal3]

Thanks, Jack. So do you know for sure if the 4" difference is in the floor boards? Or could it be different under the rear seat?

[Jack Peters]

In 1968 the wheel base changed and remained the same thru 1972.
1967 was 115" for both 2 & 4 dr
1968-1972 was 112 for 2 dr and 116 for 4 dr. & station wagons.
Track from side to side changed slightly but don't have info with me as I am on the road.
If I were guessing the difference would be under the back seat area to give more room to those in the back seat on 4 dr/sw.

[D Stroud]

md1twal3,

How are the rocker panels on the 4-door parts car?

I'm needing some for our '68 Tempest Wagon.
I would be interested in any solid body parts you have that you're not going to need.

It would help offset you cost for the parts car.
Dwayne

[Ken K]

Does anyone know if a driveshaft from a 67 A body will work in a 68 Tempest wagon with a Turbo 400 if a yoke from the 400 is used on a 67 driveshaft?

[md1twal3]

I am guessing the rockers are solid, they are off a texas car.

I am actually getting the parts from Bill Morgan (he belongs to this forum). You can e-mail him at bmorgue@hotmail.com and he can give you specifics

[1-GTO]

I would think that the floor pans are the same....just extended a few more inches to accomadate the longer wheel base?

I see your talking about using it for your '69 Judge..you do know that the 68 trunk lids will not fit a 1969 GTO/LeMans!

[JOE DEYTON]

I know the trunk floor is the same as I have put one from a 4-door 68 Chevelle in my 70 GTO.

[pontiacmaniac]

I think you will find that the floor pans are the same except the part under the rear seat.

[md1twal3]

Well, that may be. The floor pan is actually a different part number for the two and four door. I plan to get the part for under the rear seat, so I guess we will see.