FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
428 balancer recommendation
Need a good balancer for my 428 for street strip... ans recommendations ....
|
#2
|
||||
|
||||
What rev’s are you looking to run the motor up to and what times are you looking to run at the strip?
The ATI is a all around good one that does not break the Bank. in fact plenty good up to 6500 ,
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#3
|
||||
|
||||
Romac, Butler sells them
__________________
Chris D 69 GTO Liberty Blue/dark blue 467, 850 Holley, T2, Edelbrock Dport 310cfm w Ram Air manifolds, HFT 245/251D .561/.594L, T400, 9" w 3.50s 3905lbs 11.59@ 114, 1.57/ 60' |
#4
|
|||
|
|||
Another good balancer is the Powerbond SFI. I used one in my 428 build and it has held up without problems. It's fully degreed and takes stock pulleys.
|
Reply |
|
|