FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
HELP! Flexplate
I'm going to have to order a flexplate for my 65/389 and I am wondering if anyone has a good part number.
The transmission is going to be the 200-4R, do I need to order one to fit that torque converter or will any of the Pontiac fp's work? I can't find the one I had with the Turbo 400 that was on the motor and I don't know how many teeth it should have.
__________________
Nothing is impossible, impractical maybe, but never impossible. 1966 Le Mans Convertible STATUS: *In Progress* 389 (sixty over)/200-4R/10 Bolt (3.08 for now) My other ride is a 71 Jeep J4000 Pick-up Truck with factory Buick 350/Th400 Last edited by FSJplumcrazy; 01-04-2010 at 05:38 PM. |
#2
|
||||
|
||||
not sure about a 200R4 but the 700R4 i had installed used the smaller TH350 torque convertor bolt pattern on the flywheel.
__________________
Vic in SoCal. Follow me on Instagram- Cloud9orbust 66 GTO clone, 467 cubic inches of Turbocharged Multiport Fuel Injected fury twisting a TH400 into 3.90's wrapped in a 12 bolt posi. My T56 Install My Turbo Build My Vortech Supercharger Build Hyd Throw out bearing Misc Build Pics May the Karma Gods meet you half way.... |
#3
|
||||
|
||||
2004R also uses the 350 holes.
__________________
Mick Batson 1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 2+2 survivor AC auto -- 1965 Catalina Safari Wagon in progress. |
Reply |
|
|