FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Rally 2 15 x 7
I finally got a complete set of 15 x 7 rally 2 for my 1970 formula 400. Like to know if this trim center is correct for 70 and where to get correct lug nuts. I need a full set. The seller told me these where original to his dad's 73 auto ta 455 SD, so I'm hoping I got correct style,yep another fun 3 hr road trip. They look very nice paint in good shape, I never had this style before so a little excited. Advice and wisdom needed. How do I even take the trim.ring off and reinstall it? And one center cap arrow isn't red any more, so can someone guide me in right direction?
Last edited by Ramairnacho; 09-18-2022 at 01:57 AM. |
#2
|
|||
|
|||
Quote:
The trim rings just pull straight off like a wheel cover, but require a fair bit of force and always scratch the rims paint where the retaining brackets grab the rim. Putting them back on is again like with a wheel cover using the palm of your hand or a rubber hammer. Our host and many other aftermarket suppliers carry replacement centre caps that match the factory ones pretty well.
__________________
73 T/A 455, 4speed |
The Following User Says Thank You to nas t eh For This Useful Post: | ||
#3
|
|||
|
|||
RAnacho, Those are Rally II wheels for '73-up A, F, & G bodies that have the rounded brushed trim rings (these have been polished) and the brushed center cap (Brewster Green TA picture). The '70 15" Rally II wheel (and 14" Rally II's) is what nas t eh described with the polished trim ring and center cap with the red lucite 'PMD' emblem (Solar Red '68 Firebird picture).
Dennis |
The Following User Says Thank You to SD455DJ For This Useful Post: | ||
#4
|
|||
|
|||
15 inch ralley
Quote:
|
Reply |
|
|