[Scarebird]

I am installing a TKX in my 71 and am thinking of using a repop console. I need to know the distance between the shifter hump and lower edge of the console to see if it will clear.

Thanks.

[Hoodshaker]

Here's some rough measurements. Roughly 2-7/16 on the lowest side. As the pics show I pulled the upper bezel but did not remove the boot or it's retaining plate so you can add the thickness of those to the depth as appropriate.

These aren't exactly precise measurements but if you need something better let me know.

[Scarebird]

That is precisely what I needed - thanks for taking the time to get it.

I can run a console with the TKX at the proper angle.

[gman005]

I put a TKX in my 72 and had to modify the shifter porch.