[dataway]

What brand/model wide screen do you have there?

[steve]

Trying to get my Terminator EFI system running

[Dadspackard]

Originally Posted by dataway

What brand/model wide screen do you have there?

Dell 32" Curved screen. My work monitor that I was able to bring home to use while working from home.



misterp266, Thanks for fixing the pic. How did you do it ?

[michaelfind]

I am finally getting to complete and install my dream motor into the 65 GTO I have had since the late 80s! Getting the family involved in it as well, sometimes.

[1965gp]

Built a chalkboard/beer shelf for the outdoor bar out of a 68 Chevelle hood that was rusting away

[dataway]

Party at your house

[tooski]

I'm looking through my junk for 10 mm sockets.

[LKLusza]

I've done all I can do for the time being on my '70 GTO, so I dusted off my flight simulator and started tinkering with that. It started out as one of those "tab A into slot B" kind of things that you can make out of a couple of sheets of plywood. It's designed to be somewhat portable in the sense that you can break it down and reassemble elsewhere. Since I haven't done a LAN party in almost 30 years, I decided to make it more permanent by building a base with a floor and casters so I can just move it around as necessary in my basement.

I extended an old joystick so I could do a center mount, as my sims are all WWII prop era stuff (IL2 to be more specific). Then I built a custom stack to hold the CH throttle quadrant and another controller board inside to operate the three trim wheels. I also use a thing call TrackIR that lets me visually pan around the virtual environment instead of clicking various view keys on the keyboard. My wife stitched up a sweet set of cushions for me so it's easy to spend too many hours in.

[MUSLCAH]

My Best Boule yet !!

[thepontiacman]

Just picked up some parts from a 67 LeMans that a guy is putting a LS in. The car had 86000 miles.
I picked up the posi rearend yesterday.

Sent from my XT1650 using Tapatalk

[NeighborsComplaint]

Originally Posted by ddcrank

Trying to finish up my 68. Getting much closer. Almost ready to install the Legendary interior and finish up the brakes. Then the front end and shes ready for judging at the nationals. My wife and i both work for a collector car auction and finding time at home is precious. We work the auctions and do photography for there catalogs. Constantly on a plane or in a car driving to an auction or photo shoots. Its nice to have a needed break but never thought it would be in this way. Want to wish everyone good health. And thank you for being such a wonderful group to be involved with.

Triple black convertibles are very so sexy! Best of luck in your future endeavors with it.

[dataway]

LKLusza ..

Microsoft has got control of MS Flgiht Simulator again ... supposedly coming out with a new version this year .. all tied to Google Earth type sat. imagery, all kinds of new stuff.

https://www.trustedreviews.com/news/...e-date-3878850

https://www.flightsimulator.com/

[72projectbird]

I've been putting this back together. It's getting close now.

[fyrffytr1]

Yesterday my wife and I had a rock and roll party at our house. Everyone that I didn't invite didn't come! That's the first 100% participation I have had! We lined the path through our daylily bed with odd shaped rocks, leveled the path, put down weed block fabric and then put down 2 tons of pea gravel one wheelbarrow full at a time.Path is 3 feet wide and 40 feet long. We did it in less than 6 hours! Not too bad for an OLD man with the help of my wife!

[1965gp]

Looks great-=that’s a lot of work!

[Jack Gifford]

Basement re-organization turned up some old billiard balls. I drilled/tapped the 8-ball to use on the Hurst shifter- that's patiently waiting, along with a Saginaw 4-speed, for use in a future project.

[dataway]

Getting my new air system sorted out, waiting for the parts to build the aftercooler. Added an auxiliary fan, and made a deflector shield to keep the air from the fans blowing on the cylinders and aftercooler.

[Jack Gifford]

Looking ahead to this summer's towing of the lakester 700 miles to Maine (post- Covid hopefully), I realized that '59 GMCs didn't have cup-holders. So I put together a combination cup- and thermos-holder so I can one-handedly serve myself coffee! And it provides neat storage space for the 4 lb. Halon extinguisher (rules requirement for tow vehicles).
I even managed to detail and paste wax the whole truck.

[dataway]

Are you going up there for speed runs? There is a giant old air strip or something right?

[694.1]

I bet Jack has the coolest garage ever??