 |
|
| THE LOBBY A gathering place. Introductions, sports, showin' off your ride, birthday-anniversary-milestone, achievements, family oriented humor. |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
08-11-2022, 09:20 AM
|
||||
|
||||
Molnar 3" main 4" stroke crank and hybird rods window closing
FYI for those who didn't see this info in the Street section:
Tom Molnar of Molnar Technologies has agreed to produce a limited run of 3" main 4.0" stroke forged Pontiac cranks. These cranks will have a 2.20" BBC rod journal. With that said, he is also making a limited run of 6.625 .980 pin H-beam rods with a BBC 2.20 rod journal for those of us that want to use off the shelf Pontiac pistons. The plan is for floating but if there is enough demand, he will have a seperate run of pressed fit rods as well. If this interests you, please contact Molnar Technologies SOON as the window is about to close.
__________________
 Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
|
#2
08-12-2022, 04:31 PM
|
||||
|
||||
|
Tom Molnar just wrote and informed me that they have enough orders of the crank to make a run of them so it's going to happen. I have no idea if and how many "extras" will be made so if you want one, please consider ordering it.
__________________
Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
|
#3
08-12-2022, 05:01 PM
|
|||
|
|||
|
Has Butler been contacted about this? I'll bet they'd buy more units than have stepped up so far... maybe help the price too.
__________________
John IG: @crawdaddycustoms YouTube: https://www.youtube.com/channel/UCK9...Nc_lk1Q/videos |
|
#4
08-12-2022, 05:02 PM
|
||||
|
||||
|
Quote:
__________________
Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
