FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
What number pulleys do I need?
I am putting together a 1971 GTO with a 455 HO engine and it does not have power steering or air conditioning. I am looking for the single groove crankshaft and water pump pulleys. Does anyone happen to know the numbers for those pulleys? Are the numbers that are stamped on the pulleys the same numbers that would be in a parts manual? Thanks for your help.
I also need a alternator bracket for the same car if anyone knows where I could find one.
__________________
68 GTO Ram Air I Auto, Starlight Black/Teal-Survivor 68 Firebird Ram Air II 4spd, Aegena Blue/Black/Black 68 Firebird 400 Conv. Auto, Red/Parchment/Parchment 69 Firebird Ram Air IV, 4spd Matador Red/Black-Survivor 70 GTO Ram Air III 4spd Conv. burgundy(currently Black)/White/Black 71 GTO 455HO 4spd, Lucerne Blue/Black/Black 71 GTO 455HO Auto, Lucerne Blue/Sandalwood/Blue |
#2
|
|||
|
|||
481035 & 481036 are the single groove pulleys. Will ck my stash.
The non PS alt bracket is repro'ed, same '69-74. Very hard to tell the dif from an original. There is a small stepped rear alt bracket that bolts to the head... was used on man strg from '71-74, it's a tough one to come up with. The alt will mount w/o it, it just adds a degree of stability.
__________________
Buzzards gotta eat... same as worms. |
#3
|
||||
|
||||
Sent you a pm.
|
#4
|
||||
|
||||
Thanks again Roger! Let me know if you find any of those parts. Scott
__________________
68 GTO Ram Air I Auto, Starlight Black/Teal-Survivor 68 Firebird Ram Air II 4spd, Aegena Blue/Black/Black 68 Firebird 400 Conv. Auto, Red/Parchment/Parchment 69 Firebird Ram Air IV, 4spd Matador Red/Black-Survivor 70 GTO Ram Air III 4spd Conv. burgundy(currently Black)/White/Black 71 GTO 455HO 4spd, Lucerne Blue/Black/Black 71 GTO 455HO Auto, Lucerne Blue/Sandalwood/Blue |
Reply |
|
|