[ScottP]

I have a rust issue at the base of the passenger side A-pillar on my '70
Bonneville convertible and I need to do some patch work to repair. Looking
to see if anyone has a '69 or 70 fullsize parts car with clean sheetmetal in this
area. 2-door, 4-door, convertible or hardtop should all be the same and should
all work.

I'd love to find it in the northeast so I can check it out in person, but would also
be fine if someone is willing to cut out the needed area, which is honestly quite
small.

Thanks!

-Scott

[newmexguy]

Steve Barcek should be your Guy. Has Pontiac only yards in both Maricopa and Show Low. I personally had access to a '70 Catalina sedan in an El Paso TX yard, but that car is now gone. The front fenders, hood and trunk lid, along with front inner skirts are still there, loose against the fence. I did buy the front door hinges which fit all Divisions.

[Steve Barcak]

Originally Posted by newmexguy

Steve Barcek should be your Guy. Has Pontiac only yards in both Maricopa and Show Low. I personally had access to a '70 Catalina sedan in an El Paso TX yard, but that car is now gone. The front fenders, hood and trunk lid, along with front inner skirts are still there, loose against the fence. I did buy the front door hinges which fit all Divisions.

thank you for the referral. Have a good New Year.