FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Dick Boneske restored carbs
Dick rebuilt/refinished my 65 tripower unit and did a fantastic job. He was very helpful during the process answering all my questions and concerns. I would highly recommend him if you need a tripower rebuilt. I still have to do a few things such as painting the top of the carb studs, replacing the accelerator cable etc.
|
#2
|
||||
|
||||
Dick is the best.
Knows his Tri-Powers as well as or better than anyone in the business, his work is definitely top notch. Did a set of '64 carbs for me a few years back, they look perfect. Planning to run them on a '64 421 HO, I can't wait to try them out. My carbs are pictured below sitting on one of Dick's '65 intakes for linkage setup and adjustment before shipment. |
#3
|
||||
|
||||
Carbs by Dick
Mine's purter than yours.
|
#4
|
||||
|
||||
Now you can run the correct 64 "Curved Linkage" system that Dick offers, and be correct for 64, B-Man.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#5
|
||||
|
||||
Bought the parts I needed to convert to the '64 curved linkage a few weeks ago from Dick, along with a few other '64-correct parts to help dress out the engine.
|
#6
|
||||
|
||||
Dick also did my '66 setup that I am using on my 428. They look great and work awesome! Dick helped to re-jet them for this application and also helped me when I was having trouble getting it to idle. Turned out to be vacuum leak, not the carbs. Highly recommend his services.
__________________
John '67 Corvette Coupe 327, Tremec 5 Spd-SOLD 2010 Camaro 2SS-Traded 2015 Z51/3LT Corvette Stingray, Laguna Blue '67 GTO, 428, tripower, RS 600, finally done |
Reply |
|
|