 |
|
| Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
11-10-2021, 01:41 PM
|
|||
|
|||
For Sale: Comp Cams Hyd Roller - Custom Kauffman Grind - New In Box
Custom Kauffman hydraulic roller cam. Purchased new in 2009 from Tin Indian. Was spec'd for a 469 with High Ports. Was installed in the engine which has never been fired. Lost interest in the project, and parting out engine to buy parts for new project. Cam is absolutely new and repacked in the original box.
Specifications: (See attached Cam Card) Duration @ 0.050" - Intake 236, Exhaust 248 Lobe Lift - Intake .391", Exhaust .363" Valve Lift @ 1.5 RR - Intake .586, Exhaust .544 Valve Lift @ 1.65 RR - Intake .645, Exhaust .599 LSA - 113.0 Price - $390 firm + shipping Located in East Texas (75757)
__________________
Hoping to finish a project while I'm still able to push the clutch in....  1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#2
11-10-2021, 04:41 PM
|
||||
|
||||
|
Where in east Texas you located?
|
|
#3
11-10-2021, 04:44 PM
|
|||
|
|||
|
About 15 miles south of Tyler.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#4
11-10-2021, 04:56 PM
|
||||
|
||||
|
You ever head over towards Ennis?
|
|
#5
11-10-2021, 05:05 PM
|
|||
|
|||
|
Not normally, but that's only about an hour and a half away - 90 miles. Are you coming down for an event at the Motorplex? I have only been in that complex one time in the mid '90's for the Pontiac Southern Nationals.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#6
11-10-2021, 05:32 PM
|
|||
|
|||
|
UPDATE: I also have a brand new set of Comp Cams retrofit hydraulic roller lifters #857-16. Like the cam, they were installed in the same engine, but never started. The engine was stored with the rockers loosened to relax the valve springs, so the lifters were not bottomed-out. Also like the cam, they were purchased in 2009 which I believe from the other threads I've been reading makes these the more desirable version? I have a picture of the original box for reference, but I no longer have the box. They will be shipped individually wrapped for protection, but not in the original box. They are absolutely brand new, with only slight marks from having been slid in and out of the bores a few times.
I will be listing these separately, but wanted to offer them further discounted if purchased with the cam. Cam and lifters together - $875 + shipping. Located in East Texas (75757)
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#7
11-10-2021, 09:32 PM
|
|||
|
|||
|
Sale pending on cam. Lifters still available.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#8
11-10-2021, 09:51 PM
|
|||
|
|||
|
I think those lifters were made by Johnson before they had Shaver build them.Tom
|
| The Following User Says Thank You to tom s For This Useful Post: | ||
|
#9
11-11-2021, 08:49 PM
|
||||
|
||||
|
Interesting cam with 12 degrees of split.
|
|
#10
11-11-2021, 09:53 PM
|
|||
|
|||
|
Quote:
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#11
11-17-2021, 09:29 AM
|
|||
|
|||
|
Cam
Is it sold I’m in east texas. 30 miles from you.
__________________
Tom Cheatwood 62 tempest 455 68 GTO 400 |
|
#12
11-17-2021, 11:04 AM
|
|||
|
|||
|
Quote:
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
|
#13
11-17-2021, 01:39 PM
|
|||
|
|||
|
The lifter are now SOLD also.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
