FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
New body panels that come painted black.
On new body panels and parts they come painted black. i was told once its like a preservative. What is it called? After soda blasting a car body clean should a guy have it painted with this stuff? Any other advice?
__________________
Bruce Johnson 1970 GTO VOE HUMBLER |
#2
|
||||
|
||||
Stuffs called EDP primer. Opinions vary. I like good mechanical adhesion.
__________________
Jon B |
#3
|
||||
|
||||
And some of it is better quality than others. If it's really stuck, you can scuff and shoot. I have seen it comes of easily as well. I tend to take it to bare metal and epoxy prime.
Dave
__________________
'68 Bird Vert, 455 , 6x-8, 1.5 HS, HEI, PPR TC-02-HF, TH400, 2500 Hughes, 2.56 8.2 (getting swapped for second gen with shorter gears) Fishing guide in the Washington state for Salmon, Steelhead and Sturgeon. Fish-On! |
#4
|
||||
|
||||
Thank you for the info NBF823!!
__________________
Bruce Johnson 1970 GTO VOE HUMBLER |
#5
|
||||
|
||||
Thanks Fishin2Deep4U. Much appreciated!!
__________________
Bruce Johnson 1970 GTO VOE HUMBLER |
#6
|
|||
|
|||
One good way to check the edp quality is to wipe a little lacquer thinner on it. If it wipes the black primer off, remove it all. If it doesn't, sand and prime/seal. Irgoatmike
|
#7
|
||||
|
||||
Quote:
Dave
__________________
'68 Bird Vert, 455 , 6x-8, 1.5 HS, HEI, PPR TC-02-HF, TH400, 2500 Hughes, 2.56 8.2 (getting swapped for second gen with shorter gears) Fishing guide in the Washington state for Salmon, Steelhead and Sturgeon. Fish-On! |
Reply |
|
|