| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#5
01-06-2023, 09:15 PM
|
|||
|
|||
Kent, 1.65 rocker arms will require you to enlarge the pushrod passages in the heads since the fulcrum distance is moved towards the stud (closer). I would go with a cam swap myself (2802 or equivalent). Get the Hy-Lyft Johnson lifters that Paul Kippen carries, I believe. You can still use your 1.50 rockers with that cam, but you'll also need to install stronger 7/16" studs and poly-locks to adjust the lash. You would need to do the same thing with the 1.65 rocker arms.
Glad to hear new RA manifolds and Pypes exhaust are working for you. Dennis |
| The Following User Says Thank You to SD455DJ For This Useful Post: | ||
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode