[yellow1098]

Thanks I just signed up to be notified when it drops

[HWYSTR455]

The Terminator X Max supports the Holley EFI CAN gauges, they are nice, and very accurate:

https://www.holley.com/products/fuel...le_efi_gauges/

Thought I'd throw that out there....


.

[yellow1098]

I have Dakota Digital gauges that work directly with the Holley right now that are awesome….I was wondering about the new 5 inch for the terminator just as an upgrade over the 3 inch…… I do like a lot of the features on the pro dash also though ….swift light/custom background/changing that timing right there also

[yellow1098]

Soooooooo I just gave in and bought the 6.86 pro dash instead….I wanna install it in the place of the factory radio and move the radio to the lower position……any dash kit or ideas how to do that?

[HWYSTR455]

Um. You do realize that the dash isn't wide enough down there for it to fit, right? The digital dash is 7 9/16" wide. A double din is 7x4".

There is a double din kit available, you have to chop up the dash, but it still won't fit the 6.86" screen.

https://store.restoreamusclecar.com/...ter-bezel.aspx

And that's not to mention it will be kinda worthless down that low, you would have to take your eyes off the road to look at it.

With that said, you could I guess fab a floating bracket that makes it sit further out from the dash, but you will be able to see behind it, unless you fab a type of 'visor' for it.

Mounting the single din in the pocket of the console isn't difficult, and believe there are multiple kits for mounting there, but never really looked into that.


.

[yellow1098]

I totally understand your point…..I just wanted the customizing and monitoring the pro dash provides but I didn’t wanna get rid of my gauges and don’t love the look of just a screen in place of them …features .like monitoring my timing and tranny and features the other screens don’t have is why I went with it….just wanna make it look clean

[HWYSTR455]

Well you could put it in front of the console pocket, lean it against the dash. It's probably going to get bumped around, as you toss passengers from side to side. That's what made me go no-console! Heheh!

.

[yellow1098]

Who’s got some good ideas to mount this here so it looks good? I could use some long screws as there is about a half inch at the top in the back but that would look ****ty….maybe some black tubes over the screws?

[HWYSTR455]

Yeah, that's what I was saying, that area would work best if you're not going to put it on the dash. You just have to dig, find something you can make work. You're going to have to fab something.

https://www.holley.com/products/fuel.../parts/553-359

https://quickdrawbrand.com/accessori...-dash-display/

https://www.google.com/search?sca_es...h=750&dpr=1.25

I'd be curious to see what you come up with, post when you try something.

.

[R 70 Judge]

Originally Posted by yellow1098

Who’s got some good ideas to mount this here so it looks good? I could use some long screws as there is about a half inch at the top in the back but that would look ****ty….maybe some black tubes over the screws?

I have mine on the column in front of my factory gauges. IMO it doesn’t detract from the interior and is functional.

I can get better pictures/video tomorrow if you’re interested

[yellow1098]

Thanks guys! Yes Judge I would love to see how you mounted it