FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Moldex billet steel crankshaft
I have a Moldex billet steel crankshaft 4.25 stroke with GRP aluminum Chevy rods. I bought it with 15 passes on it (confirmed by Kaufmann) and I only put 10 passes on it. I put new bearings in the engine before I made the 10 passes so it is still perfect
The crank was worth over 3k years ago so I will sell the crank and rods for $2000.00. I'll throw in the .060 over Ross pistons Possible delivery to Norwalk |
#2
|
||||
|
||||
are the journals BBC or SBC
rod and 3'' main?
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
#3
|
|||
|
|||
I don't have everything completely apart yet but the mains are Pontiac 455 and the journals are for Chevy big block (off the shelf rods).
|
The Following User Says Thank You to Oldgoatnuts For This Useful Post: | ||
#4
|
|||
|
|||
I've had requests for picture and some measurements. I came up with 3.25 mains, 2.20 journals, 6 7/8" rods
|
#5
|
|||
|
|||
Couple more pictures
|
#6
|
|||
|
|||
Sale pending. I received a deposit and will deliver the parts to Norwalk. Thanks
|
#7
|
|||
|
|||
interester need pic of piston top what compression dome dish???
|
#8
|
|||
|
|||
Flat top , compression was about 11 to 1. I've received a deposit on them
|
Reply |
|
|