| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
03-14-2019, 02:59 PM
|
|||
|
|||
1966 Bucket Seats interchange
Are the front bucket seats the same for a Bonneville and GTO just with different tracks?
|
|
#2
03-15-2019, 12:11 PM
|
|||
|
|||
|
Somebody who knows for sure should chime in, but it is my belief that that big car buckets are slightly wider than the LeMans/GTO.
|
|
#3
03-15-2019, 01:06 PM
|
|||
|
|||
|
Big car buckets are a little wider then "A" body.
__________________
Practicing social distancing for 65+ years |
|
#4
03-17-2019, 01:45 AM
|
|||
|
|||
|
Thank you for the replies. I had found a 66 GP with headrest seats and a 421. The 421 is a YF 389. The car has such bad rot that its not worth saving. So I passed.
|
|
#5
03-17-2019, 03:46 AM
|
||||
|
||||
|
I was able to use the reclining seat and headrest frame from a 67 GP, switch to my original GTO seat springs, foam, and seat cover with no issues.
|
|
#6
03-19-2019, 01:25 AM
|
|||
|
|||
|
I got a set of reclining headrest seats from a 66 Riviera. I measured the distance between the screws that hold the bottom skirts on. The skirts interchanged between my 66 GTO seats. Both seats measured 10" between the outter screw for the left and right skirt. I measured the distance between the left and right track bolt holes and both were 13". The tracks were different though. I don't know if the E body Riviera seats are the same as the B body, but they are the same as the A body.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
