FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
![]()
Hello,
Finally got the painted fenders on, assembly is going well but I'm not sure on the correct hardware for the inside bottom of the inner fender where it attaches to the firewall. I have attached a pic of the location I am referring to. I checked the assembly manual and it seems to show a bolt and washer as separate pieces. I tried looking up the GM number for the washer in the AMK catalog but could not find it. What I really need to know is the washer OD. I assume it must be larger than the holes in the inner fender to completely cover the holes, but the assembly manual pic is hard to read. Also interested in knowing if the manual is wrong and/or if anyone has seen a bolt with captive washer installed by the factory. Thanks
__________________
Michael 1970 Oshawa built 1 option Judge. 24 year restoration/upgrade project finally finished! 1979 Trans Am - low-buck drag car project for when I retire |
#2
|
||||
|
||||
![]()
C'mon, help a brother out LOL...no one knows how big these washers are?
__________________
Michael 1970 Oshawa built 1 option Judge. 24 year restoration/upgrade project finally finished! 1979 Trans Am - low-buck drag car project for when I retire |
#3
|
|||
|
|||
![]()
1-1/2 od
this site is dead compared to the old days. I miss them! |
The Following User Says Thank You to gto4evr For This Useful Post: | ||
#4
|
||||
|
||||
![]()
__________________
Michael 1970 Oshawa built 1 option Judge. 24 year restoration/upgrade project finally finished! 1979 Trans Am - low-buck drag car project for when I retire |
Reply |
|
|