FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
I have just about reached the point
when I will be drilling the holes in my trunk lid for the rear wing on my 70 gto. Am I correct that I just drill where the four holes are already stamped in the inner skin of the lid? Thanks |
#2
|
|||
|
|||
I have just about reached the point
when I will be drilling the holes in my trunk lid for the rear wing on my 70 gto. Am I correct that I just drill where the four holes are already stamped in the inner skin of the lid? Thanks |
#3
|
||||
|
||||
Yes, I have a link at the office to a diagram that gives the actual dimensions. I'll post it tomorrow.
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#4
|
|||
|
|||
wt7 those holes in the under brace stamping are left over from 1969 don't use those as any sort of a guide for your 1970 wing!
|
#5
|
|||
|
|||
Thanks for the info, do you know where to
drill the holes? |
#6
|
|||
|
|||
wt7 sorry my 70 judge is still at the body shop
and the gm assembly manual doesn't give any measurements if you can wait i'll get them asap. gord |
#7
|
|||
|
|||
Gordon, I would appreciate it if you could
get me those dimensions, no big hurry, up here in Massachusetts it is still too cold to be spreading bondo, thanks |
#8
|
|||
|
|||
wt7 give me another 24hrs. Judge just got back from body shop, still in shock! The wing was installed at body shop for transit, tomorrow i'll remove it and take the measurements.
Gord |
#9
|
|||
|
|||
Gordon, what color is your judge? Mine is
polar white, and I am going to use the red/ yellow/black stripes. I hope to finish the bodywork this year and send it out to a good bodyshop to be painted soon after that. Thank you in advance for the measurments. |
#10
|
|||
|
|||
I, also am interested in those measurements. i am thinking of a wing on my Lemans sport, Thanks, dave
|
#11
|
|||
|
|||
wt7 here goes the measurements. they are all from
|
#12
|
|||
|
|||
wt7 all measurements are from top side here goes
17.75 top to first hole. 5.5 outside edge to first hole. 11.5 bottom edge of lid to second hole on left side. all measurements on center of holes. holes are 9/32 i bet all wings have different stud centers so be carefull and use this as a rough guide. hope this helps if not email me .Gord |
#13
|
|||
|
|||
Gordon, thank you for the measurements.
|
#14
|
|||
|
|||
wt7, i think a white is supposed to use the blue ,red, yellow stripe, but dont quote me, i could send u a picture of my 70 conv with stripes to let u see what u think.
|
#15
|
|||
|
|||
Hey Norton,
Thanks for the info, I have seen white judges at car shows with red/black/yellow, blue/ pink/orange, and even the green/yellow/?, which was really ugly. I like the red/black/yellow the best so that is what I plan on using. In the promo pictures for the 70 it uses red/black/ yellow. For this reason I thought this was the somewhat official colors for the polar white cars. No? |
Reply |
|
|